题库分类
题库分类
>
网络运维
题目内容
FTTH接入光缆网一般由三部组成,其中从小区光交到用户家的光缆称为()。
A:馈线光缆
B:引入光缆
C:主干光缆
D:配线光缆
题目答案
查看答案
扫码查看本题答案
相关问题列表
👉
GPON系统中,OLT通过()管理维护通道对终端设备进行配置和维护。
[1]
对于ONU的语音业务优先级默认为
[2]
雷电直接击中建筑物或其他物体,产生破坏性很大的( ),造成建筑物、电气设备及其他被击中的物体损坏,雷电的这种破坏形式称为直击雷。
[3]
当网管出现TEMP_OVER时,处理方法不包括()
[4]
BWF10.5-25电容器型号中字母B表示( )。
[5]
对于非结构化的ces业务,端口类型应该设置为()
[6]
在高压电气设备上工作,保证安全的组织措施有( )。
[7]
我们通过抓包软件获取的交互报文通常需要过滤后才能分析,请选出pppoe协议报文过滤的条件
[8]
处理故障时若确需断业务处理,需报请(),得到同意后方可进行相关操作
[9]
中国移动智能组网特色功能
[10]
下列( )属于电气设备故障。
[11]
代维服务规范服务语言要求中对使用专业术语的要求是
[12]
电力猫的特点
[13]
工作许可人(运行值班负责人)应负责审查工作票( )。
[14]
客户续费升级了千兆光宽带,测速只有100Mbps左右,可能的原因有
[15]
以下由光板检测的告警性能有()
[16]
变压器的效率是指变压器的( )之比的百分数。
[17]
SN2-10断路器为( )。
[18]
下列关于回路编号的说法,不正确的是( )。
[19]
在中性点不接地的电力系统中,当系统发生单相完全接地故障时,单相接地电流数值上等于系统正常运行时每相对地电容电流的( )倍。
[20]
SF6负荷开关装设的( )可随时监测开关本体内充入的SF6气体压力。
相关考题
👉Whichofthefollowingstatementsabouttheurbanmodelisnottrue?
A:Permanent screens, used in the half-screen part of the urban model, are used to define the environment along the calculation profile in a general way and, therefore, the locations of the screens do no
B:Temporary screens, used in the half-screen part of the urban model, are used to describe details of the environment more accurately, near the mobile antenna and, therefore, the locations of the screen
C:The recursive microcell part of the urban model uses something called the illusory distance, which is always longer than or equal to the line-of-sight distanc
D:The resulting path loss from the urban model is obtained by taking the maximum value of the two contributions, calculated by the half-screen and recursive microcell algorithms.
E:Inside a building, the path loss is calculated using a simple building penetration algorithm.
查看答案
👉WhatistheminimumrequiredisolationbetweentwoTXantennasatthesamesite?
A:20 dB
B:30 dB
C:40 dB
E:50 dB
查看答案
👉WhatisthedatumusedinternallybyaGPSreceivercalled?
A:WGS84
B:RT90
C:Bessel-B?hm
D:Gnomonic
E:Universal Transverse Mercator
查看答案
👉WhatisICDM?
A:Intra-Cell Downlink Measurements
B:Interfered Cell Disturbance Matrix
C:Interference Combined with Downlink Measurements
D:Internal Cell Disturbance Measurements
E:Inter Cell Dependency Matrix
查看答案
👉WhereistheTXreferencepoint?
A:Where the jumper cable is connected to the RBS.
B:Where the jumper cable is connected to the output of the TX.
C:Where the jumper cable is connected to the output of the combiner.
D:Where the jumper cable is connected to the antenn
E:Immediately outside the antenn
查看答案
5G题库刷题