题库分类
题库分类
>
网络运维
题目内容
下列不属于SDH设备三大基本功能的是:()
A:复接
B:交叉连接
C:线路传输
D:告警产生
题目答案
查看答案
扫码查看本题答案
相关问题列表
👉
针对客户提出的非施工、装机有关的敏感性问题,如资费、价格等,应使用“对不起,这方面的问题。
[1]
路由器的数据链路层收到报文长度大于该路由器将要发出接口的最大MTU时,采取的策略是()。
[2]
机顶盒直播报错,260015,可能的原因及处理办法是?
[3]
在同一电气连接部分用同一工作票依次在几个工作地点转移工作时,以下哪些说法是正确的 ( )。
[4]
在额定电压下,变压器铁损是一个恒定量,它随实际运行电压( ),是衡量变压器能耗的重要指标。
[5]
( )指正常情况下有明显断开的备用电源或备用设备或备用线路。
[6]
SDH自愈保护的方式主要有()
[7]
ZXCTN6200/6300设备的RSCCU单板功能模块包括:()
[8]
用小磁针做实验,小磁针转动静止后指北的一端叫S极。
[9]
对单相接地电流大于5A时的电动机,应装设反映( )的零序电流保护。
[10]
关于以太网指标测试,说法正确的是()
[11]
现场用电脑认证上网正常,但远程无法PING通AP管理地址,也无法远程登陆管理,可能是由于下列哪种原因导致
[12]
真空断路器触头开断过程中,主要依靠( )形成电弧。
[13]
变压器的连接组是指三相变压器一.二次绕组之间连接关系的一种代号,它表示变压器一.二次绕组对应电压之间的相位关系。
[14]
在中国PTN基本上采用()技术
[15]
信号继电器必须自保持。
[16]
下列关于POE交换机的说法,不正确的是
[17]
EOC面板可以实现无线无缝连接。
[18]
GPONOLT系统支持的最大mac数是________。
[19]
无功功率中的“无功”的含义是“交换”。
[20]
告警是分等级的,其中()是指不影响现有业务,但需要采取故障检修以防止恶化的告警。
相关考题
👉Whichofthefollowingstatementsabouttheurbanmodelisnottrue?
A:Permanent screens, used in the half-screen part of the urban model, are used to define the environment along the calculation profile in a general way and, therefore, the locations of the screens do no
B:Temporary screens, used in the half-screen part of the urban model, are used to describe details of the environment more accurately, near the mobile antenna and, therefore, the locations of the screen
C:The recursive microcell part of the urban model uses something called the illusory distance, which is always longer than or equal to the line-of-sight distanc
D:The resulting path loss from the urban model is obtained by taking the maximum value of the two contributions, calculated by the half-screen and recursive microcell algorithms.
E:Inside a building, the path loss is calculated using a simple building penetration algorithm.
查看答案
👉WhatistheminimumrequiredisolationbetweentwoTXantennasatthesamesite?
A:20 dB
B:30 dB
C:40 dB
E:50 dB
查看答案
👉WhatisthedatumusedinternallybyaGPSreceivercalled?
A:WGS84
B:RT90
C:Bessel-B?hm
D:Gnomonic
E:Universal Transverse Mercator
查看答案
👉WhatisICDM?
A:Intra-Cell Downlink Measurements
B:Interfered Cell Disturbance Matrix
C:Interference Combined with Downlink Measurements
D:Internal Cell Disturbance Measurements
E:Inter Cell Dependency Matrix
查看答案
👉WhereistheTXreferencepoint?
A:Where the jumper cable is connected to the RBS.
B:Where the jumper cable is connected to the output of the TX.
C:Where the jumper cable is connected to the output of the combiner.
D:Where the jumper cable is connected to the antenn
E:Immediately outside the antenn
查看答案
5G题库刷题